Меню

Flojet Pumps Bottled Water Dispenser Pump 115 V BW5000A New and improved Second Generation Dispenser

Flojet Pumps Bottled Water Dispenser Pump 115 V. # BW5000A
New and improved Second Generation Dispenser

The new and improved Flojet BW5000A is Flojet’s
replacement for the discontinued BW1000A And BW4000A

The Flojet NEW and improved eco-friendly BW-5000A, Bottled Water System Plus, for homes and commercial appliances, is part of Flojet’s premium water dispensing product line. When a water bottle is connected to the system, fresh water is available for use with coffee/tea machines, water dispensers, refrigerators, ice makers, or any other application where portable potable water is needed. The Bottled Water System Plus is also designed for convenience — the pump shuts off when the water source is depleted, and when water is restored, the pump will automatically restart. This eliminates the chance of any damage to the pump and control box from running dry. Features and benefits of the NEW and improved eco-friendly BW-4000A, Bottled Water System Plus include an illuminated On/Off switch that provides clear visibility in dark cabinets or hard to reach places; a long life motor to ensure years of reliable operation; a Flojet diaphragm pump that provides dependable run dry capabilities, extending the life of the pump ; quick disconnect ports that allow for easy wand replacement in seconds; noise dampening rubber feet to minimize noise pollution; built-in thermal protection prevents overheating, protecting the pump and control box from damage and a new Ergonomic T-Shaped wand handle for ease of installation and removal of wand from bottle. The new and improved Flojet BW5000A is Flojet’s replacement for the discontinued BW1000A and BW4000A

Applications: Bottled water dispensing; refrigerator ice maker; coffee brewer, espresso coffee cart and drinking water faucet water dispenser Pump Module: Demand pump with On/Off switch. 6′ cord with plug. Operation: Water demand turns pump on and off automatically. Water Source: Designed to pump water from 3, 5, or 6 gallon water bottles. Low Water Protection: System automatically shuts off when bottled is empty. Check Valve: Built-in check valve to prevent back flow. Suction: Wand with strainer and hose assembly Discharge Tubing: 20 feet of 1/4″ tubing Refrigerator Connection: Refrigeration fitting Universal seal cap: Fits any 3, 5, and 6 gallon plastic water bottle. Instructions: Installation and maintenance Maximum Flow: 1.09 GPM Operating pressure: to 30 PSI Electrical: 115 volts, 50/60 Hz. 0.5 amps. Module dimensions: 2.7″ high, 5.4″ wide, 8.5″ long Carton dimension: 6″ high, 11″ wide», 16″ long Weight: 10 lbs Certifications: UL and CUL listed

Источник



5000 Series Bottled Water System by

Text of 5000 Series Bottled Water System by

5000 Series Bottled Water System bywww.xylemflowcontrol.com 2015 Xylem Inc. All rights reserved.Flojet is a trademark of Xylem Inc. or one of its subsidiaries.81000453 Rev A. 04/2015

HOW THE SYSTEM WORKS

The 5000 Series Bottled Water System by Flojet is designed to pump purified water from commercially available 5-gallon purified water bottles. The system will deliver the water under pressure to an individual drinking water faucet, the water inlet of a refrigerator for the icemaker and chilled drinking water tap, to a faucet in portable sinks and to certain personal use and commercial use coffee / tea brewers / espresso machines.

When the suction wand is inserted into the standard 5-gallon bottle, it will activate the float switch on the end of the wand and turn on the pump. This same float switch shuts off the system when the bottle is empty. The wand has a built in back-flow preventor valve that prevents water in the system from flowing back into the bottle, or spilling while changing bottles.

The heart of the system is the main module that automatically fills an appliance or dispenses water through a faucet when there is demand.

The system is equipped with an automatic thermal cut-off device for additional protection.

INVENTORY OF SYSTEM COMPONENTS

A. Main module with On/Off rocker switch.B. Suction Wand and Hose AssemblyC. 20 ft (6.1m) of 1/4 in. (6.35mm) Discharge Tube D. Kit Fitting: Compresion nut and sleeve.E. Wall power transformer.

The Bottled Water Dispensing System may also be placed in a pantry, closet, cellar or other location where a grounded electrical outlet is available.

Insert suction hose port fitting into pump module IN port and slide locking port clip in place.

Insert DC plug/connector into pump module DC IN port.The connections for the float and power supply will require

moderate force to insert fully. This is a design feature that assures the connections are held securely after initial

Читайте также:  Пылесос с контейнером для пыли Supra VCS 2090

installation. MAKE SURE PLUG / CONNECTOR IS INSERTED ALL THE WAY INTO THE CONNECTIONS. FAILURE TO

INSERT FULLY WILL LEAD TO POOR OPERATION OR NO OPERATION.

To install tube into OUT port. Push 1/4 dischargetubing all the way into quickconnect port(as far as it will go)

To remove tube from OUT port:1. Push tube all the way in2. Hold gray ring against black

port with finger or flat tool3. Pull tube out

Push clip up to lock

Insert float sensor switch plug/connector into pump module SWITCH port.

The connections for the float and power supply will require moderate force to insert fully. This is a design feature that assures the connections are held securely after initial installation. MAKE SURE PLUG / CONNECTOR IS INSERTED ALL THE

WAY INTO THE CONNECTIONS. FAILURE TO INSERT FULLY WILL LEAD TO POOR OPERATION

OR NO OPERATION.

Select a cabinet large enough to accommodate the 5 gallon (19L) bottle and suction wand assembly. Place the pump module on the floor of the cabinet with on/off switch and suction tube facing out toward the cabinet doors. Position as close as possible to agrounded electrical outlet andplace the five gallon bottle close tothe pump module without kinking thesuction hose.

There is 20 ft. (6.1 m) of 1/4 in. (6.35 mm) O.D. polyethylene tubing supplied with the FLOJET Bottled Water Dispensing System. Carefully measure the distance between the pump module outlet and the appliance water inlet or optional faucet, and cut the tubing clean and square to prevent fitting leaks. If the refrigerator and faucet are being connected, use 1/4 in. (6.35 mm) tube T fitting and place it in an accessible location. Push the cleanly cut tubing end into the pump module outlet port, past the o-ring to tube stop. Route tubing to the refrigerator water valve and connect it to the water inlet valve in the back of the refrigerator by using the tube connector fitting. First slip nut over the tube, then place the ferrule over the tube, then install onto the refrigerator water valve fitting and tighten.

For installation and use with commercial coffee and tea brewing equipment:Many commercial coffee and tea brewing machines can be connected to a water supply line. Ensure that you have a 1/4 in. (6.35 mm) I.D. connection fitting at the water inlet that can accept the supplied 1/4 in. (6.35 mm) O.D. tubing. These brewing machines have a factory installed device that restricts incoming water to a safe pressure that wont damage the brewing machine. This device is usually referred to as an inlet pressure regulator or flow restrictor. If you intend to use the Flojet BW system with one of these brewing machines, you should remove the brewing machines inlet restrictor device. Consult the brewing machine manufacturer for details. Failure to remove the brewing machines restrictor may cause the Flojet BW series pump to cycle itself off and on repeatedly, leading to premature motor failure of the Flojet BW unit. This type of failure is not covered under warranty. Use of filter devices with your commercial brewer is unnecessary; see below

For installation on refrigerators with ice making and/or water dispensing functions:Do not use any external filtration devices. These will cause the pump to over-cycle, possibly causing premature pump failure, not covered under warranty. If your refrigerator has factory installed internal filtration that must remain in place as part of the water line, this too may cause over-cycling resulting in pump failure. Contact the refrigerator maker and inquire about obtaining an empty or dummy filter housing for use instead of the standard filter model. If none is available, the use of a small accumulator tank will be necessary. You may order Flojet P/N 30573002B, tank, and P/N 20381-064, fitting kit. Please contact Flojet for more information.

WARNING: Risk of Electrical Shock!

Follow all local electrical and safety codes. Make sure power source conforms to the voltage on the power adapter provided with the Bottled Water System.

CAUTION: DO NOT USE COPPER TUBING WITH ANY MODEL OF FLOJET BOTTLED WATER DISPENSING SYSTEMS

Observe accident prevention regulations in force. Use suitable equipment and protection. Always refer to the local and/or national regulations, legislation, and codes in force regarding

the selection of the installation site, plumbing, and power connections.

Electrical installationElectrical Hazard:

WARNING: Make sure that all connections are performed by qualified installation technicians and in compliance with the regulations in force.

Читайте также:  Новые правила по охране труда при эксплуатации промышленного транспорта важные нюансы

The local regulations in force overrule specified requirements listed below.

Electrical connection checklistCheck that the following requirements are met: The electrical leads are protected from high temperature, vibrations, and collisions. The current type and voltage of mains connection must correspond to the specifications on the data plate on the pump.

WARNING: Before starting work on the unit, make sure that the unit and the control panel are isolated from the power supply and cannot be energized.

Before the Bottled Water Dispensing System is put into service, the system should be sanitized by following the maintenance and sanitation clean in-place procedure.

1. Connect Power Adapter to suitable AC Power Outlet. and connect low voltage connector to DC IN port on main unit.

2. Power Switch ON.3. Follow manufacturers plumbing and operating instructions

when connecting commercial coffee and Tea Brewers and refrigerators / Ice makers.

4. BLEED AIR FROM SYSTEM: Turn pump switch ON. Water will begin to flow. Operate the system for 30 seconds to 1 minute into a 2-1/2 gallon pail. When the air is successfully purged from the system, a steady laminar flow of water will stream out the end of the hose.

NOTE: Air Bleed required only on start up. Changing bottles will not require air bleed.

SUCTION WAND REMOVAL ANDCHANGING BOTTLES

Before removing suction wand from empty bottle, move bottle to an open area outside of cabinet. Put new bottle next to empty bottle, clean neck and cap area with detergent, and remove cap. Remove suction wand from empty bottle by lifting wand cap with a rocking motion and pull cap off bottle, sliding suction wand out of the bottle and place directly into new bottle while sliding cap over new bottle neck.

SUCTION WAND INSTALLATION

SANITIZE BOTTLED WATER SYSTEM AND WAND BEFORE INSERTING WAND INTO BOTTLE. To install the suction wand into standard 5 gallon bottle, place bottle close to system and remove bottle cap, then install suction wand into bottle. (Note: If bottle is over filled, dispense enough water to allow the suction wand to be installed to the bottom of the bottle). Push suction wand bottle cap over bottle and push wand to bottom center of bottle.

Do not place suction wand on floor, counter, or sink as this could contaminate the suction wand assembly. If bottle is over filled, dispense enough water to allow the suction wand to be pushed to bottom of bottle.

Источник

Flojet BW5000 Bottled Water System — White

About this product

Product Identifiers

Product Key Features

More items related to this product

item 1 Flojet BW5003 Bottled Water Dispensing System UK PLUG 240 Volt 1 — Flojet BW5003 Bottled Water Dispensing System UK PLUG 240 Volt

Model BW5000A Replaces BW4000

item 2 FloJet BW5000 Bottled Water System PLUS

Model BW5000A Replaces BW4000

Xylem 2 — FloJet BW5000 Bottled Water System PLUS

Model BW5000A Replaces BW4000

item 3 Bottled Water Plus Dispensing System BW5000 3-6 Gal. Bottle Water Pump Dispenser 3 — Bottled Water Plus Dispensing System BW5000 3-6 Gal. Bottle Water Pump Dispenser

item 4 Flojet Pump Bottled Water Plus Dispensing System Portable Quick Connect Port 4 — Flojet Pump Bottled Water Plus Dispensing System Portable Quick Connect Port

item 5 BW5000-000A Single Inlet Bottled Water Dispensing System 0.5GPM 115V FLOJET 5 — BW5000-000A Single Inlet Bottled Water Dispensing System 0.5GPM 115V FLOJET

item 6 FloJet BW5000 Bottled Water System PLUS

Model BW5000A 6 — FloJet BW5000 Bottled Water System PLUS

item 7 Flojet BW2000A 220V AC Bottled Water Dispensing Pump System Replaces Bunn NEW 7 — Flojet BW2000A 220V AC Bottled Water Dispensing Pump System Replaces Bunn NEW

item 8 Flojet BW4020-000A Dual Inlet Bottled Water Dispensing System Plus 115V 8 — Flojet BW4020-000A Dual Inlet Bottled Water Dispensing System Plus 115V

Best Selling in Hot & Cold Water Dispensers

Current slide of — Best Selling in Hot & Cold Water Dispensers

hOmeLabs Bottom Loading Water Dispenser — Stainless Steel

  • EUR 142.35 New
  • —- Used

VEVOR Water Dispensing Pump System

  • EUR 53.53 New
  • EUR 6.62 Used

Primo Bottom Loading Water Cooler Black — BLZ13898

  • EUR 169.91 New
  • —- Used

InSinkErator H-HOT150C-SS Water Dispenser — Chrome

  • EUR 125.61 New
  • —- Used

Toothbrush Holder UV Light Sterilizer Cleaner Toothpaste Dispenser Organizer

  • EUR 10.05 New
  • —- Used

American Made P-00960 Water Bottle, Blue — 5 Gallon

  • EUR 14.23 New
  • —- Used

5gallon Drinking Water Jug Bottle Pump Manual Dispenser Home Office School Works

  • EUR 7.44 New
  • —- Used
Читайте также:  MATRIX II EH Cчитыватель proximity карт EM Marine HID черный

Save on Hot & Cold Water Dispensers

Trending price is based on prices over last 90 days.

Current slide of — Save on Hot & Cold Water Dispensers

InSinkErator H-HOT150C-SS Water Dispenser — Chrome New

InSinkErator F-2000 Replacement Filter Plus

30 Pack Non Spill Caps Reusable 55mm 3 and 5 Gallon Water Bottle Snap On Cap

PUR Classic 30 Cup 2-Stage Water Filter Dispenser Maxion Filter Technology

American Maid Replacement Water Bottle Caps 2 Pack 53 mm BPA Free NEW

Beverage Dispenser Spigot Faucet STAINLESS STEEL 16 mm with Ceramic Valve Tap

You may also like

Current slide of — You may also like

Flojet Hot & Cold Water Dispensers

White Drink Water Bottles

White Vacuum Water Filter Bottles

Vacuum Water Bottles

White Stainless Steel Drink Water Bottles

Water Filtration Bottle Water Filters

Ratings and Reviews

Most relevant reviews

Compact and luxurious size.

I highly recommend Flojet BW5000 Bottle Water System PLUS — Model BW5000A Replaces BW4000 — Xylem. This product has high performance, quality and durability. This system is easy to install.

Verified purchase: Yes | Condition: New

Great concept

It’s a great concept. The pump is not strong enough to push through the water filter on the refrigerator causing the pump to short cycle on and off. Yes, it’s a new filter. Works fine without the filter. I doubt it will last short cycling. It appears to be made well, just not enough psi available. Its factory sealed not able to open up to look at adjusting pressure switch. Other than that, your choice.

Verified purchase: Yes | Condition: New

Excellent cure for hard water

This is the second flojet system I have owned. The first was noisy and eventually leaked. This one is much quitter and works flawlessly. I have used this product to pump from a 5 gallon water bottle to my refrigerator to allow for ice cubes and water dispensed. I have well water and, even filtered, it does not work as good as bottled. An excellent product.

Verified purchase: Yes | Condition: New

Superb quality and compact size

I purchased the flojet BW 5000 to replace a pump I was using at the time. The other pump was twice the size, made with cheap materials and was noisy and unreliable. I bought the other pump along with a refrigerator only two months ago. I regret no keeping the receipt as I am stuck with an item that cost me more than the flojet and started breaking down the first week of use. My family loves the smooth operation and silence of the flojet.

Verified purchase: Yes | Condition: New

Refrigerator ice machine

Purchased to eliminate possible issues of leaking water from refrigerator when hooked up to constant water pressure in our seasonal lake house. When we arrive we simply turn on the very quiet pump to supply water to the frige. When we leave for extended times just a flick of the switch and no worries of leaking water. Very satisfied with the quality of this product.

Verified purchase: Yes | Condition: Pre-owned

Источник

BW5000-010A Flojet HIGH FLOW Bottled water dispensing system

BW5000-010A Flojet HIGH FLOW Bottled water dispensing system

BW5000-010A Flojet HIGH FLOW Bottled water dispensing system

Поделись ссылкой и заработай

Ссылка на товар: получить

  • Стоимость доставки
  • Характеристики
  • Отзывы
  • Вы смотрели
  • Похожие
Оригинальное название BW5000-010A Flojet HIGH FLOW Bottled water dispensing system
EAN 0705474208005
Артикул BW5000-010A
Фирма Flojet
Привязка разный
Особенности высокая модель потока bw5000-010a
Группа спортивные
UPC 705474208005
Количество в упаковке 1
Производитель FLOJET
Упаковка: Вес: 505.0 кг
Группа товаров Диспенсеры для воды

Всемирно известный интернет-магазин Amazon предлагает приобрести недорогие товары высокого качества. BW5000-010A Flojet HIGH FLOW Bottled water dispensing system по доступной цене — ваш шанс воспользоваться уникальным предложением не выходя из дома. BW5000-010A Flojet HIGH FLOW Bottled water dispensing system — купите прямо сейчас и наслаждайтесь шопингом с максимальным комфортом. Специальные условия на доставку в Череповец.

«>

Контактная информация

  • г. Москва
  • г. Санкт-Петербург
  • г. Екатеринбург
  • г. Казань
  • г. Нижний Новгород
  • г. Красноярск
  • г. Самара
  • г. Краснодар
  • г. Челябинск
  • г. Воронеж
  • г. Ростов-на-Дону
  • г. Новосибирск

+7 (495) 481-3910 (Онлайн)

+7 (812) 627-1688 (Онлайн)

+7 (343) 384-5799 (Онлайн)

+7 (831) 429-1779 (Онлайн)

+7 (391) 204-6563 (Оффлайн)

+7 (846) 206-0188 (Оффлайн)

+7 (861) 203-6470 (Оффлайн)

+7 (473) 204-5331 (Оффлайн)

+7 (863) 303-6125 (Оффлайн)

+7 (383) 280-4305 (Онлайн)

  • Уже купили
  • Хиты продаж
  • Большие скидки
  • Доставка
  • Скидки
  • О компании
  • Акции
  • Новости
  • Статьи
  • Помощь
  • Контакты

Партнеры

Мобильное приложение

Приложение Nazya в вашем смартфоне — самый быстрый и удобный способ покупать любые товары онлайн.

Источник