Меню

Руководство по эксплуатации D Link DP G310

D-Link DP-G310

D-Link DP-G310

Категория: Сети, связь, телекоммуникации, интернет, безопасность
Группа: Принт/факс-Серверы
Устройство: D-Link DP-G310

Инструкции и файлы

D-Link DP-G310 Инструкция по эксплуатации

Чтобы ознакомиться с инструкцией выберите файл в списке, который вы хотите скачать, нажмите на кнопку «Скачать» и вы перейдете на страницу, где необходимо будет ввести код с картинки. При правильном ответе на месте картинки появится кнопка для получения файла.

Если в поле с файлом есть кнопка «Просмотр», это значит, что можно просмотреть инструкцию онлайн, без необходимости скачивать ее на компьютер.

В случае если материал по вашему не полный или нужна дополнительная информация по этому устройству, например драйвер, дополнительные файлы например, прошивка или микропрограмма, то вы можете задать вопрос модераторм и участникам нашего сообщества, которые постараются оперативно отреагировать на ваш вопрос.

Также вы можете просмотривать инструкции на своем устройстве Android

Скачать на Google Play

Характеристики

    Порт принтера
  • Высокоскоростной порт USB 2.0

Интерфейсы LAN

  • Беспроводный интерфейс 802.11g
  • Порт 10/100BASE-TX

    Сетевые протоколы

  • Протоколы транспортного уровня: TCP/IP, NetBEUI, AppleTalk/EtherTalk
  • Протоколы TCP/IP: BOOTP, SNMP, Telnet, TFTP, FTP, LPD, RARP, DHCP
  • IPP (internet Printing Protocol)

    Управление и диагностика

  • Стандарт: SNMP
  • MIB: MIB-II (RFC 1213)
  • Mac OS RendezVous

    Назначение IP-адреса

  • Ручное
  • Автоматически через DHCP, BOOTP или RARP-сервер

    Возврат кустановкам по умолчанию
    Кнопка Reset

    Индикаторы

  • Power
  • Ethernet (Link/Act)
  • WLAN
  • USB

    Встроенный беспроводный интерфейс

    Стандарты беспроводных сетей

  • 802.11g
  • 802.11b

    Скорости передачи данных*

  • 802.11g: до 54 Мбит/с (6/9/12/18/24/36/48/54 Мбит/с)
  • 802.11b: до 11 Мбит/с (1/2/5.5/11 Мбит/с)

    *Теоретическая скорость беспроводного сигнала. Реальная пропускная способность будет изменяться в зависимости от окружающих условий.

    Технология модуляции
    Direct Sequence Spread Spectrum (DSSS)

    Полоса частот
    2.4

    Рабочие каналы
    Каналы от 1 до 13

    Схемы модуляции
    DQPSK, DBPSK, CCK и OFDM

    Антенна
    Внешняя дипольная антенна с коэффициентом усиления 2 dBi

    Мощность передатчика
    16 dBm (типичная)

    Чувствительность приемника (для 802.11b)
    (типичная @ PER o C +/- 5 o C):

  • 11 Мбит/с (CCK): -82 dBm
  • 5.5 Мбит/с (CCK): -86 dBm
  • 2 Мбит/с (QPSK): -90 dBm
  • 1 Мбит/с (BPSK): -90 dBm

    Чувствительность приемника (для 802.11g)
    (типичная @ PER o C +/- 5 o C):

  • 54 Мбит/с (OFDM): -66 dBm
  • 48 Мбит/с (OFDM): -64 dBm
  • 36 Мбит/с (OFDM): -70 dBm
  • 24 Мбит/с (OFDM): -72 dBm
  • 18 Мбит/с (OFDM): -80 dBm
  • 12 Мбит/с (OFDM): -84 dBm
  • 9 Мбит/с (OFDM): -86 dBm
  • 6 Мбит/с (OFDM): -88 dBm

    Радиус действия*

  • В помещении: до100 м
  • Вне помещения: до 400 м

    * На радиус охвата могут влиять факторы окружающей среды

    Безопасность
    Шифрование 64/128-бит WEP (выбираемое пользователем)

    Поддерживаемые ОС

  • Windows 98, ME, 2000, XP
  • MacOS EtherTalk
  • Unix
  • NetWare 5.0 или выше (Native NDS)
  • lpd
  • Физические параметры

      Питание
    • Постоянный ток 5В / 2,5А
    • От внешнего адаптера питания

      Размеры
      90 x 82,4 x 32,5мм

      Вес
      121 г.

      Рабочая температура
      От0 o до 50 o C

      Температура хранения
      От -25 o до 60 o C

      Влажность
      От 5% до 95% без образования конденсата

      Сертификаты EMI

    • FCC Class B
    • CE Class B
    • С-Tick

      Комплект поставки

    • Принт-сервер DP-G310
    • CD (содержит руководство пользователя и программу Print Server Administration)
    • Руководство по быстрой установке
    • Адаптер питания

    Источник

    

    Руководство по эксплуатации D-Link DP-G310

    Руководство по эксплуатации для устройства D-Link DP-G310

    • Домашняя
    • D-Link
    • Принтер
    • D-Link DP-G310

    Устройство: D-Link DP-G310
    Размер: 6,41 MB
    Добавлено: 2014-09-28 12:21:52
    Количество страниц: 88
    Печатать инструкцию

    Как пользоваться?

    Наша цель — обеспечить Вам самый быстрый доступ к руководству по эксплуатации устройства D-Link DP-G310 . Пользуясь просмотром онлайн Вы можете быстро просмотреть содержание и перейти на страницу, на которой найдете решение своей проблемы с D-Link DP-G310 .

    Для Вашего удобства

    Если просмотр руководства D-Link DP-G310 непосредственно на этой странице для Вас неудобен, Вы можете воспользоваться двумя возможными решениями:

    • Полноэкранный просмотр -, Чтобы удобно просматривать инструкцию (без скачивания на компьютер) Вы можете использовать режим полноэкранного просмотра. Чтобы запустить просмотр инструкции D-Link DP-G310 на полном экране, используйте кнопку Полный экран .
    • Скачивание на компьютер — Вы можете также скачать инструкцию D-Link DP-G310 на свой компьютер и сохранить ее в своем архиве. Если ты все же не хотите занимать место на своем устройстве, Вы всегда можете скачать ее из ManualsBase.
    Печатная версия

    Многие предпочитают читать документы не на экране, а в печатной версии. Опция распечатки инструкции также предусмотрена и Вы можете воспользоваться ею нажав на ссылку, находящуюся выше — Печатать инструкцию . Вам не обязательно печатать всю инструкцию D-Link DP-G310 а только некоторые страницы. Берегите бумагу.

    Резюме

    Ниже Вы найдете заявки которые находятся на очередных страницах инструкции для D-Link DP-G310 . Если Вы хотите быстро просмотреть содержимое страниц, которые находятся на очередных страницах инструкции, Вы воспользоваться ими.

    Источник

    D-Link DP-G310 User Manual

    Wireless USB Print Server

    Building Networks for People

    Contents

    Setting up the DP-G310 .

    Power On Self Test .

    Using the Web Configuration .

    TCP/IP Printing for Windows XP .

    TCP/IP Printing for Windows 2000 .

    TCP/IP Printing for Windows 98SE/Me .

    Unix/Linux Printing (See PS Admin Manual on CD-ROM) .

    Setting up AppleTalk or LPR Printing in MAC OSX .

    Setting up AppleTalk Printing in MAC OS9 .

    Printing from Mac OS Client Workstation.

    Contacting Technical Support .

    Warranty and Registration .

    Appendix: DP-G310 Printer Compatibility List .

    Package Contents

    Contents of Package:

    D-Link DP-G310 Wireless USB Print Server

    Manual and Warranty on CD

    Printed Quick Installation Guide

    If any of the above items are missing, please contact your reseller.

    A computer with an installed Ethernet adapter for initial configuration purposes only

    Windows XP/2000/ME/98SE, Mac OS with AppleTalk , or Linux

    A computer or a network of computers with wireless capability

    Internet Explorer 6.0, or Netscape Navigator version 6.0 or above, with JavaScript enabled

    The printer must support the required Operating System

    Introduction

    The D-Link DP-G310 Print Server is an 802.11g wireless USB 2.0 high-speed Print Server that can also connect to your Ethernet/Fast Ethernet network. Now you can locate USB printer services virtually anywhere in your home or office. The DP-G310 manages the flow of print files from workstations or file servers to connected printers, delivering print jobs to printers much faster than a file server on a PC. With one USB 2.0 port, the DP-G310 can connect to almost any printer with a USB port.

    The DP-G310 includes easy-to-use software to install on most Windows-based networks. Protocol support for TCP/IP, NetBEUI, and AppleTalk are provided to ensure seamless connection to major networking operating systems.

    The DP-G310 has a built in Web-based management feature that allows users to easily configure and manage print queues through TCP/IP. The DP-G310 also supports Telnet as an alternative method to configure the unit.

    The DP-G310 improves network printing services in the following ways:

    The DP-G310 delegates print jobs to the connected USB printer. This provides workload relief to your file servers and allows the file servers’ full capacity to be used for file access or other direct services to network users. On peer-to-peer networks, workstations can print directly to the Print Server without increasing the load of another workstation or server.

    The DP-G310’s USB 2.0 port can transmit data to high-speed laser printers much faster than a PC’s parallel printer port.

    Because the DP-G310 is very portable and inexpensive compared to a PC-based print server, and the Print Server connects to your file servers through the network, printers can be deployed to locations of maximum convenience to users.

    The DP-G310 offers extraordinary flexibility, operating with all major network operating systems and protocols:

    Windows NT/2000, Windows 95/98SE/ME, Windows XP NetWare 5.x NDPS LPR Remote Printing

    Windows 2000/XP, Windows 95/98SE/ME, Microsoft LAN Manager, IBM LAN Server

    Windows-based setup and administration software, PS Admin , is supplied with the Print Server, making configuration and management quick and easy. The Print Server also supports configuration and management via the Telnet protocol for networks without Windows-compatible systems.

    The DP-G310’s USB port is located on its rear panel. The USB can be configured using the PS Admin program or the print server’s Telnet interface. (See the PS Admin User’s Guide , available on the CD that came with the DP-G310, for information about configuring the print server’s ports.) The Print Server also supports web configuration permitting users to configure settings through the web browser. The default IP Address is as follows:

    Default IP Address – 192.168.0.10

    Subnet Mask – 255.255.255.0

    The PC’s IPAddress must be in the same subnet as the Print Server’s IPAddress for the two devices to communicate. (For example, if your Print Server’s IP Address is 192.168.0.10, with a subnet mask of 255.255.255.0, then your computer’s IP Address should be 192.168.0.x, where x is a value between 1-254, excluding 10.)

    Front Panel LED Indicators

    There are two front panel indicators, each holding two separate LEDs (aligned in a vertical position). As shown below, the first indicator holds the Power and the USB LED. The second indicator holds the Ethernet and WLAN LED. Upon boot-up, the Power light stays on continuously and all other LEDs light up momentarily one-by- one, then turn off.

    A steadily lit LED indicates proper operation of the Print

    A steadily lit LED indicates your USB printer is printing; otherwise, this LED is off.

    A steadily lit LED indicates proper network connection; no lit

    LED indicates an unsuccessful network connection. Ablinking

    LED indicates activity (configuration or printing).

    A steadily lit LED indicates a proper wireless network connection; no lit LED indicates an unsuccessful wireless network connection. A blinking LED indicates activity (configuration or printing).

    Rear Panel Connectors

    Network Cable Connector

    The Print Server’s rear panel has a LAN port for CAT5 Ethernet cabling. The port supports the NWay protocol, allowing the Print Server to automatically detect or negotiate the transmission speed of the network.

    DC Power Connector

    The DC power input connector is located on the Print Server’s rear panel and is labeled DC 5V.

    Wireless Basics

    D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking brings.

    A wireless LAN (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. WLANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users.

    Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards.

    People use wireless LAN technology for many different purposes:

    Mobility — Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on realtime information can significantly improve worker efficiency.

    Low Implementation Costs – WLANs are easy to set up, manage, change and relocate. Networks that frequently change can benefit from WLANs ease of implementation. WLANs can operate in locations where installation of wiring may be impractical.

    Installation and Network Expansion — Installing a WLAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. Wireless technology allows the network to go where wires cannot go — even outside the home or office.

    Scalability – WLANs can be configured in a variety of topologies to meet the needs of specific applications and installations. Configurations are easily changed and range from peer-to-peer networks suitable for a small number of users to larger infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed.

    Inexpensive Solution — Wireless network devices are as competitively priced as conventional Ethernet network devices.

    Wireless Basics (cont.)

    Based on the IEEE 802.11g standard, the DP-G310 is interoperable with existing compatible 2.4GHz wireless technology with data transfer speeds of up to 54Mbps when used with other D-Link Air Plus G devices.

    Installation Considerations

    The D-Link Air Plus G DP-G310 lets you print through your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

    1. Keep the antenna of the DP-G310 in an upright position.

    2. Keep the number of walls and ceilings between the DP-G310 and other network devices to a minimum — each wall or ceiling can reduce your D-Link wireless product’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

    3. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters). Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.

    4. Building materials can impede the wireless signal — a solid metal door or aluminum studs may have a negative effect on range. Try to position wireless devices and computers with wireless adapters so that the signal passes through drywall or open doorways and not other materials.

    5. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate extreme RF noise.

    Setting up the DP-G310

    Installing the Print Server

    WARNING: Configuration problems may result if the Print Server is powered up without first establishing its network connection. Follow this procedure to avoid complications at the configuration stage.

    1. Confirm proper operation of your printer before connecting the DP-G310.

    2. When you have confirmed proper operation of your USB printer, turn your printer power OFF .

    3. Confirm that your network is operating normally.

    4. Connect the DP-G310 to your network, using a straight-through CAT5 cable.

    5. While the printer is powered OFF , use the USB printer cable to connect the DP-G310 to your USB printer.

    6. Switch ON your USB printer.

    7. Plug the DC power adapter into the DC 5V power socket on the rear panel of the Print Server.

    8. Plug the power adapter into a power outlet. This will supply power to the DPG310, as it has no external power switch. The green Power LED on the Print Server’s front panel should illuminate steadily, and the Print Server’s SelfTest will proceed.

    Power ON Self-Test

    Every DP-G310 has been factory-tested to operate properly.

    When the DP-G310 is powered ON , it also automatically performs a Self-Test on each of its major components. The final result of the Self-Test is signaled by the state of the USB LED indicator following the Self-Test. Preliminary to the actual component tests, the LED indicators are tested to confirm their steady and flashing operation.

    Immediately after power-up, three of the green LEDs should illuminate steadily for several seconds. Then the USB LED should flash three times. Irregularity of the LED during this LED test may mean there is a problem with the LED itself.

    The actual component tests immediately follow the LED tests. A normal (no fault) result is signaled by a flashing of the USB LED, followed by a darkened LED.

    If the Self-Test routine detects any component error, then following the LED tests the Self-Test will halt and the LEDs will continuously signal the error according to the following table.

    Источник

    Скачать драйвер для D-Link DP-G310 (rev.B) Print Server Firmware 2.00

    • Firefox
    • CCleaner
    • Opera
    • Avast Free Antivirus
    • Adobe Photoshop
    • Dr.Web CureIT
    • Kaspersky
    • K-Lite Codec Pack
    • Skype
    • Telegram
    • Driver Booster
    • PowerPoint
    • Софт
    • Драйвера
    • Драйвера PCI/USB/PMCIA/COM
    • DLL файлы
    • Программы для Вконтакте
    • Драйвера
    • Графические карты и ускорители
    • Сканеры / Цифровые камеры / Веб-камеры
    • Звуковые карты / Audio /DJ Gear
    • Принтеры
    • Модемы и факсы
    • Сетевое оборудование
    • Клавиатуры и мыши
    • Джойстики, игровые устройства
    • Мониторы
    • Биос
    • Другие драйвера и инструменты
    • Мобильные
    • Материнские карты ( Системные платы )
    • TV Тюнеры и похожее
    • Прошивки (Firmware)
    • Bluetooth
    • Card readers
    • CD/ DVD / Blu-Ray
    • Жесткие диски
    • PCMCIA (PC Card)
    • USB
    • PCI / MTD / SCSIAdapter
    • Router / Switch / AP
    • VoIP
    • Планшеты
    • Игровые консоли
    • Умные часы / Носители / Фитнес
    • Веб-камеры

    D-Link DP-G310 (rev.B) Print Server Firmware 2.00

    Размер: 625 KB Разработчик: D-Link —> ОС: OS Independent Имя файла: DPG-310_REVB_FIRMWARE_2.00.ZIP

    Fixes:

    — Fixed DHCP issue

    It is highly recommended to always use the most recent driver version available.

    Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

    Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

    Примечание: Ссылка «скачать» может вести как непосредственно на файл, так и на сайт производителя, на котором Вы можете найти нужный файл.
    Это связано с тем, что некоторые производители не позволяют размещать прямые ссылки на файлы.

    Источник

    Читайте также:  Стиральная машина LG E 10B8ND5 инструкция по применению